Silvercrest SFB 10.1 C3 Spezifikationen PDF herunterladen (Seite 105)

SilverCrest SFB 10.1 C3

English - 103

Press to go back one menu level. To return to the start window,

press one of the device buttons.

Locking the configuration menu (LOCK SETUP)

This menu item lets you lock access to all configuration menus. While the

lock is enabled, "LOCKED" is displayed if a configuration menu is

accessed. The only option available will be the unlock option.

1. Press and hold the S button for 3 seconds.

2. Press , select “CONFIGURE” and press to confirm.

3. Press , select “LOCK SETUP” and press to confirm.

“LOCK” appears on the display. Press to confirm. The display

reads “SUCCESS” followed by “LOCK SETUP”. The configuration

menus are now locked.

4. If you now attempt to change anything in a menu, the message

“LOCKED” appears.

Press to go back one menu level. To return to the start window,

press one of the device buttons.

5. To unlock, press and hold the S button for 3 seconds.

6. Press , select “CONFIGURE” and press to confirm.

7. Press , select “LOCK SETUP” and press to confirm.

“LOCK” appears on the display.

8. Press , select “UNLOCK” and press to confirm.

The display reads “SUCCESS” followed by “LOCK SETUP”.

9. The configuration menus are now unlocked.

Press to go back one menu level. To return to the start window,

press one of the device buttons.

Resetting to factory defaults (RESET)

1. Press and hold the button for 3 seconds.

2. Press , select “CONFIGURE” and press to confirm.

3. Press , select “RESET” and press to confirm.

4. Press and choose between “ALL RESET” and

“MODE”.

5. Press to confirm your entry.

Choosing “ALL RESET” will restore the settings for all devices. The

procedure is as follows:

6. After choosing “ALL RESET”, press to confirm. The display will

read „CONFIRM RST“.

You can still press to cancel the reset at this point.

7. Press to confirm your entry. The display reads “OK” and then

returns to the start window.

The day of the week and the time are not reset.

Choosing “MODE” restores the settings for the selected device only. The

procedure is as follows:

8. After you confirm your selection “MODE” by pressing , the

display shows the device currently selected. Select the device you

want by pressing the corresponding device button.

9. After confirming your choice with , the display will read

"CONFIRM RST".

You can still press to cancel the reset at this point.

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 113 114

Kommentare zu diesen Handbüchern

Keine Kommentare

Silvercrest SFB 10.1 C3 Spezifikationen Seite 105

Kommentare zu diesen Handbüchern