SetEditSL65 for SL65 Silvercrest Contents: 1 General 2 Installation 3 Step by step a Load and back up a settings file b Arrange settings c
To change the viewing mode of the channel lists you can also click on the letters "O" (original), "N" (Name), "F" (fr
With both methods described above you can move of course more than one channel. Another possibility is to move a channel directly to a position (e.g
You can move channels from the upper list to the lower list, because it is the same list but from different points of view, the entry is changed in bo
3.c The favourite list The SL65 Silvercrest receivers have one favourite list for your favourite channels. To assign one or more channels to the
3.d Channel parameters To rename a channel (e.g. "Das Erste" to "ARD") please select the channel and choose from the channel
letters occur in the word, nothing is changed (example: EinsMuXx). Words with less than 4 letters are also not altered, so that abbreviations such as
3.e Write settings into the receiver When you have finished making your personal settings you have to write them into the receiver before you can
3.g Using the transponder functions and entering new channels by hand There is a short summary of the transponder functions in chapter 5.e. Poss
To do this select the new transponder and click with the right mouse button in the now empty channel list and select the function "new" from
When you enable the option "always on top" in the configuration menu, SetEditSL65 will always be in the foreground on your desktop. This c
1 General SetEditSL65 is a program to change the settings (program sequence, names of channels etc.) of the SL65 Silvercrest digital satellite re
All duplicates are shown. The different pairs of duplicates are marked in different colours. This function does not distinguish between different ty
3.h Import of channels You have the possibility to get ready-made settings lists from the Internet. These lists can be used partially or complete
Channel list: The imported channels will be pasted at the location the cursor is on at the moment you paste the channels. Sometimes it is only possib
If you have marked the "new channels" or the "not existing channels" in a channel list, you can select them all. Please click in t
3.i Settings from other receivers and how to convert a settings file In the following you find a description how to transfer a settings file fro
Please open with "File" -> "New" an additional editor window with the format of the file you wish to convert. Then please load
3.j DXAndy settings On the site www.dxandy.com you can download current settings for Astra, Hotbird and Turksat. DXAndy settings are sorted by
With Satellites you can choose which satellites you can receive (Astra, Hotbird and/or Turksat). In the channel list you only see channels of the sele
Crypt systems: Here you can choose the crypt systems you can receive. The channels of the other crypt systems will be hidden. With "Only FTA&qu
In our example you want to see (additional to the German channels) English and Spanish channels too, i.e. you have to select "ENG" and &quo
2 Installation System requirements: PC with Windows NT/2000/XP/Vista, one free serial port and 20 MB of free disc space. First Installation: If
3.k Wish lists With SetEdit you have the possibility to create a personal channel list, save this list as wish list and then (if you have got th
when you adapt a settings file to this wish list and the first of the linked channels is not found, this channel will be replaced by the next channel
With the shortcut "STRG-Alt-N" you get from your actual position in the channel list to the position of the next "not found" or &
4 Program use and personal configuration SetEditSL65 is mostly used with the mouse. You can also reach many functions with keyboard shortcuts.
this satellite. When you select a channel, the transponder, the satellite and the favourite list (if the channel is in the favourite list) are marked
With a double-click on the frame "TV channels" or "Radio channels" only the choosen channel list is shown. With another double-cli
5 Functions 5.a File functions To get the file functions, please click on the "File" button. You will get the following popup menu:
5.b Configuration Click on the "Config." button to change the general settings of SetEdit. There are three tab sheets in the configurat
If you activate Show channel count in lists the number of channels of each satellite, transponder and the favourite list is shown behind the name of t
New or not existing channels (for the import function, see chapter 3.h) The icons for e.g. "scrambled". With a double click on the f
Here you can download the upgrade in form of a zip file. (You can either start the installation immediately or save this file on your hard disc first.
5.c Channel functions Please select the channels you like to edit/modify. You get most functions when you click with the right mouse button on a
You can also delete one or more selected channels by hitting the Del key on your keyboard. With Copy you can copy a channel, then you can paste the c
(SetEdit.ini) there is a list of up to 10 words that are converted although they are shorter than 4 letters (CO, INT, FOX) and a list of words that ar
5.d Satellite functions When you click on a satellite only the channels and transponders of this satellite are shown. When you click with the ri
Load satellite configuration: With this function you can overwrite the satellite and LNB configuration of the actual settings with a configuration yo
5.e Transponder functions If you select a transponder only the channels that belong to this transponder are shown. If you select "All"
If you want to create a new transponder, and a satellite is selected in the satellite list, the transponder is assigned to this satellite. If "Al
5.f Favourites The SL65 Silvercrest receivers have one favourite list into which you can copy your favourite channels. When you click with the
6. FAQ What do I need to transfer the settings from the receiver to the PC and back? You need a serial null-modem cable (no 1:1 cable) with the
I want to write Humax settings into my Topfield receiver. How can I do this? Load the Humax settings into the corresponding SetEdit editor and conver
3 Step by step I assume that the program has been installed on your PC as described in chapter 2. Also it is assumed that you are using SetEditSL
window. With the short cut Alt-Esc you can bring it in the foreground. Where can I get help if I have other problems? If you have any other problems
Please make sure that your name is in the e-mail (there are often e-mails like "from: [email protected], I have sent you money today please sent m
8 Glossary and abbreviations Baud rate: The speed at which data is transferred via the serial port to the receiver. The number is in bits per sec
Settings are the part of the memory of your receiver where all channel information is stored. It contains all channel information such as sequence, c
Now click on the button "file". You will get the following menu: Here you select the function "Read from receiver", and you ge
Note: If you want to write settings that you have found in the Internet into your receiver, you have to be careful: A settings file does not only con
3.b Arrange settings Now you have the settings (from your own receiver or from the Internet) in SetEditSL65. The most important functions will be
Kommentare zu diesen Handbüchern